14 Inch Universal RV Roof Vent for Trailer, Camper, Motorhome - RV Vent Covers for Roof - OEM Lid Replacement (14 x 14 White 2-Pack)

Easy to install, prefect fit. Allows light to enter the coach without being too bright. Heavy duty. Recommend.

I bought three of these vent covers to replace all of mine at the same time while resealing the roof.There are cheaper versions available, but I’m a firm believer that you get what you pay for.The cheaper ones have the metal crossbar only in the middle of the cover. Whereas these, the crossbar is full length. This provides a better seal and will last longerThe covers and hardware need to be assembled before installation. All of the hardware/fasteners were included and assembly was pretty simple and straightforward, but not without some issues. The predrilled holes weren’t uniform. Some had residual material from the molding process which prevented the screws from passing through. I used an awl to slightly ream each hole. I would suggest doing the same thing to every hole before you begin installing the hardware. The included silicone washers are supposed to prevent the screws and nuts from loosening, but I added a small drop of Loctite blue threadlocker just to make sure. Especially since they will be subject to a lot of vibration. The assembly process actually took longer than the installation process; which is as simple as sliding off the old cover and then sliding on the new one.Overall, these vent covers appear to be constructed of quality material and look like they will hold up as well as, or better than, the originals. These are great replacements that I would definitely recommend!

These are your basic roof vent replacement lid and they work fine and seem to be made of good materials both the metal and the plastic.They came with the appropriate hardware and the instructions are good but I can't give them four stars due to the fact that they aren't assembled and require basic assembly before they can be installed on your RV! No, it's not hard to do and anybody can assemble them, it's just that it's a little strange not to have them put together when they arrive.They will work however and don't hesitate to buy them, just know that you're going to spend an extra 5 or 10 minutes putting the little screws in the right hole and tightening them up, being careful not to over tighten Etc...

Very easy to put together fit perfectly and very good for the price excellent product

Perfect fit

Installation if pretty straightforward. I replaced four on my RV in less than an hour.

I have a 24' Class C RV, and needed to replace two vent covers. My previous ones were dark gray, and these let in a whole lot more light. Installation was pretty straight forward as everything except the hinge is removed from below, although the screen screws were hard to see at first. You need to go on the roof to undo the hinge and put the new cover on, but super easy as you just bend a tab on the hinge. The only suggestion I would have is that it would be very nice if these came pre-assembled. You just have to mount the hinge and cross bar, but they don't increase package size and take about 15 minutes to assemble with the tiny screws...not a big deal though.

Great product, easy to install.

Fit perfect and easy to install

Replaced the old lids fairly easily and these work fine. Unsure about durability as they have only been in place for 6 months but previous reviews show no issues. Make sure you have this type of lid, there are more than one type. If you have an older trailer, I would change these out as a precaution. One of my original lids on my 2003 trailer shattered and I was very fortunate to notice this before the spring rains which would have caused major damage to the floor inside.

Easy to install. All parts were in package and I am happy

There just a little cheaply made

Pour remplacer le couvercle de notre évent qui était endommagé. Il s'ajuste parfaitement à notre VR et n'a pas été trop difficile à installer.