VLAND RGB Headlights Compatible with Dodge Challenger 2008-2014 with Sequential Indicator Halo and Colorful Halo DRL, D2S/ D2H Bulb(Not Included) for HI/LO Beam

I bought these as a Christmas gift for myself and there's a number of useful things to note.1. First, I strongly recommend getting super bright lights. For mine, I got Light Moses 12000lm 360° h7 led bulbs. H7 in my experience is easier to install than the other listed compatible bulbs.2. An issue I encountered was I was having difficulty adjusting the bulbs and horizontal adjustment is difficult if you already have the headlights and bumper installed, so I would advise you do adjustments with the bumper still off (or have the person who installed them for you do the adjustments).3. A question that I always had trouble finding an answer to is if the knob that controls the lights can JUST turn the halos on for DRLs. The answer is yes, just turn the knob to the running light option (refer to the manual if you don't know what that looks like).4. ALSO, make sure the green bulb clips are installed correctly and give it a wiggle or tug to make sure because I had to re clip it on because it came loose and the headlights were all over the place and it was a hassle to screw it back on with the bumper on.5. Another mistake people make is plugging in the turn signal outlets backwards causing no running lights. Just make sure to try plugging them in both ways if that's an issue for you. This is also the same for the headlight bulbs for they have + and - terminals.PS: The green bulb clips can be confusing. To remove them, just twist them left (I believe) then unclip them to insert the headlight bulb and reinstall them reclipping it together and twisting it back on the original base it came from.Final thoughts: If the manufacturers provided better instructions, I would easily give this product a 5 star review, but other than that the headlight's function so far so good (4 months so far) and I see no signs of the halos fading BUT I will certainly update if and when they do.

The media could not be loaded.  Hellcat style Air inlet ( just remove the center cap), led Bluetooth control halo lights. Just wish they came with the bulb for the price. But if you install the LED DS2 bulb set from vland it's a direct plug in. No ballast install needed. Gives a great look and allowed the air filter to breath. Just wished it would allow you to customize the LED halos more with the app. Also the price directly from vland is cheapest without three headlights bulbs or around the same price here with the bulbs setup. You do have to take them full front bumper off. So just be careful and keep track of your screws 😂.

Install was fairly easy, but wouldn't initially work with my AFE Momentum GT Cai and intake tube. I ended up modifying the driver's side housing, by removing the HID ballast mount below the intake hole in the housing. I cut it even with the ring edge of the housing intake hole, then taped up the housing area that I had cut. Now the intake tube works as it should. I used H7 leds anyway, so I didn't need the HID ballast mount..I have a plug-&-play DRL harness from Gen5DIY, to make the halos light whenever the car is running. If you don't have that harness, the halos will only be on when the running light/headlight switch is on or when your auto-lights activated (unless your car already has the DRL feature.) [Most US Challengers didn't have DRLs until 2015]

This is a great product, and well worth the expense. The headlights are a direct replacement for the factory headlight assembly. There were no issues fitting them, it was as simple as if I was putting the stock headlights back in.This headlight DOES have a removable center cap in the parking light to allow it to work as an intake tube. The cap is a nice gloss black, and looks great in the headlight if you decide not to use the intake tube option.Some small notes about these (not problems, just notes of advisory):You will only need D2H OR D2S bulbs. You only need one or the other, not both. I accidentally bought both pairs but VLand was very easy to work with on a return.The green circular clip headlight bulb mounts may be a “little” fragile. The passenger side was easy to install, as I learned what I was doing on the driver side light. Basically, don’t be heavy handed with using it, take your time and line it up correctly.There are no instructions with the headlight install or wiring hookup. I also could not find instructions online. Having said that, the install was quite intuitive and plug & play. The new headlight will plug into the factory main plug, and the parking/turn signal light will use the factory mount for the factory light, but you will simply remove the marker bulb and plug the LED wire into that plug socket.To summarize, this is a great product. The two issues I found are minor, and do not take away from my overall satisfaction with the product.

Overall pretty good, couldn’t get the bulb into the socket correctly but it’s close, it wiggles a little bit but won’t fall out and not noticeable while driving. much brighter than stock headlights and the drls look good.

Replaced the headlights from stock to these and love the look, the Halo's are not as bright as the new model vehicles so don't get your hopes up as they are daytime running lights. But still have decent brightness for what they are for. I personally paired these lights with their VLAND D2H Led Headlight, and they work great.

The media could not be loaded.  My driver side headlight is defective. Not worth paying almost $600 dollars for them and they don't work right i love how my car looks with them but now i have to remove the bumper all over again just to get them replaced or fixed thats a couple of hours thrown to the trash just because they don't work. And the worst part is that they didn't even last a whole day when they stop working.