M.2 Heatsink Cooler 2280 SSD Double-Sided Heat Sink with Thermal Silicone pad for PS5/PC PCIE NVME M2 SSD(Black）)

This is great used it for my Legion Go S however if your planning to use this for yours as well you will have to trim off the frame above the SSD (now sure why Lenovo has them there) and you you will need to remove the thick thermal pad as it's not needed but do not throw it away put it away someplace it will not dry out.

I purchased this for a Crucial 4 TB PCI-e Gen 4 SSD. I monitored the temperature while transferring files to the drive, continuously, for one hour. Files were transferred in groups ranging from 105 GB to 135 GB at a time and the temperature never exceeded 39 C…AND the port the drive is in is directly below the graphics card. Obviously the graphics card wasn’t under load at this time but the physical proximity of the card limits air flow and drive still never exceeded 39 C.By comparison, the system SSD (a 1 TB Samsung Gen 5) which utilizes the heatsink that came with the motherboard maintained a temperature of 43 C….so Gen 5 definitely runs hotter (as expected) even while idle.Based on what I’ve read, 50 C is an acceptable temperature for an SSD when it’s idle, so I’m amazed that the drive never exceeded 39 C when it was under load for an hour.

Not the greatest thermal transfer material, but you don't have to mess with paste. No issues though. Did exactly what it is supposed to do.

Easy to install, someone else’s review mentioned to make sure your motherboard has enough room to accommodate this heatsink because it is a little chunky in size. It comes with thermal strips to adhere to the front and back of your m.2 SSD and has been working well thus farI only took a star off because there was a piece of what looked like a small piece of earwax stuck to the instructions

It works. Was kinda difficult following the instructions as a dyslexic. Everything fits perfectly, it’s looks fine and it’s good quality.

Impossibly tight fit on a Gigabyte B850 Wifi6 board. I have a 5070 Ti on top of it and it barely is able to fit in that direction too. Im very surprised it worked. Gen 5 SSD (Crucial P510) dropped approx 20 degrees C.

I bought this M.2 2280 SSD heatsink after my PS5’s 2TB NVMe SSD kept crashing. Turns out, it was overheating without a heatsink. This cooler fixed the issue completely! Installation was a breeze—took me about 5 minutes and the heatsink fits perfectly in the ps5 space

Just what I needed for my son’s PS5.